ExxonMobil™
C6LL 3338 Series (LL 8460 Series)
C6 Linear Low Density Polyethylene
ExxonMobil™ C6LL 3338 is a linear low density hexene copolymer designed to offer excellent ESCR and toughness. This resin is ideally suited for applications that require the optimum balance of processability, stiffness and low temperature toughness.
- Supplier
-
Additive
C6LL 3338.UV: Long Term; UV-20 Stabilizer: Yes
C6LL 3338p.UV: Long Term; UV-20 Stabilizer: YesApplications
- Agricultural Tanks
- Chemical Storage Tanks
- Large Size Playground Equipment
- Pallets
- Potable Water Tanks
- Septic Tanks
Forms
C6LL 3338.UV: Pellets
C6LL 3338p.UV: Powder
Resin Properties
Typical Value (English) |
Typical Value (SI) |
Test Based On |
|
|---|---|---|---|
| Density | 0.938 g/cm³ |
0.938 g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.3 g/10 min |
3.3 g/10 min | ASTM D1238 (mod) |
Thermal
| Deflection Temperature Under Load (DTUL) at 66psi — Unannealed | 129 °F |
54 °C | ASTM D648 |
| Deflection Temperature Under Load (DTUL) at 264psi — Unannealed | 99 °F |
37 °C | ASTM D648 |
| Peak Melting Temperature | 260 °F |
127 °C | ExxonMobil Method |
Molded Properties
| Tensile Strength at Yield 2.0 in/min (50 mm/min) |
2600 psi |
18 MPa | ASTM D638 |
| Elongation at Yield (2.0 in/min (50 mm/min)) |
10 % |
10 % | ASTM D638 |
| Flexural Modulus — 1% Secant | 99000 psi |
680 MPa | ASTM D790B |
| Environmental Stress-Crack Resistance10% Igepal, F50 100% Igepal, F50 |
60 >1000 |
60 >1000 | ASTM D1693A |
Impact
| Impact Strength-40°F (-40°C), 0.125 in (3.18 mm) -40°F (-40°C), 0.250 in (6.35 mm) |
39 114 ft·lb ft·lb |
53 154 J J | ARM |
Disclaimer
The information presented here was acquired by Quantum from the producer of the material. Quantum assumes no responsibility or liability for the accuracy of the information contained on this website. Please refer to the downloadable pdf data sheet provided directly by the producer.
Nota:
Esto es una traducción. Quantum no asume responsabilidad alguna por la exactitud de la traducción. Cualquier discrepancia o diferencia creada en la traducción no es vinculante y no tiene ningún efecto legal. Si surge alguna duda relacionada con la exactitud de la información contenida en la ficha técnica traducida, consulte la versión en ingles.