ExxonMobil™
C6LL 5037 Series (LL 8450 Series)
C6 Linear Low Density Polyethylene
ExxonMobil™ C6LL 5037.UV is a linear low density hexene copolymer designed to offer excellent stiffness, processability, whiteness, and ESCR. It is ideally suited for applications that require the optimum balance of stiffness and processability.
- Supplier
-
Additive
Long Term UV-10 Stabilizer: Yes
Applications
• Consumer Articles
• Junction Boxes
• Playground Equipment
• Potable Water Tanks
• Small Storage Boxes
Form(s)
C6LL 5037.UV: Pellets
Revision Date
09/01/2014
Resin Properties
Typical Value (English) |
Typical Value (SI) |
Test Based On |
|
|---|---|---|---|
| Density | 0.937 g/cm³ |
0.937 g/cm³ | ASTM D1505 |
| Melt Index (190°C/2.16 kg) | 5.0 g/10 min |
5.0 g/10 min | ASTM D1238 |
| Peak Melting Temperature | 259 °F |
126 °C | Proprietary Method |
Thermal
| Deflection Temperature Under Load (DTUL) at 66psi — Unannealed | 122 °F |
50 °C | ASTM D648 |
| Deflection Temperature Under Load (DTUL) at 264psi — Unannealed | 97 °F |
36 °C | ASTM D648 |
Molded Properties
| Tensile Strength at Yield 2.0 in/min (50 mm/min) |
2400 psi |
17 MPa | ASTM D638 |
| Elongation at Yield (2.0 in/min (50 mm/min)) |
20 % |
20 % | ASTM D638 |
| Flexural Modulus — 1% Secant | 90000 psi |
620 MPa | ASTM D790B |
| Environmental Stress-Crack Resistance10% Igepal, F50 100% Igepal, F50 |
60 >980 hr hr |
60 >980 hr hr | ASTM D1693A |
Impact
| Impact Strength-40°F (-40°C), 0.125 in (3.18 mm) -40°F (-40°C), 0.250 in (6.35 mm) |
60 160 ft·lb ft·lb |
81 217 J J | ARM |
Disclaimer
The information presented here was acquired by Quantum from the producer of the material. Quantum assumes no responsibility or liability for the accuracy of the information contained on this website. Please refer to the downloadable pdf data sheet provided directly by the producer.
Nota:
Esto es una traducción. Quantum no asume responsabilidad alguna por la exactitud de la traducción. Cualquier discrepancia o diferencia creada en la traducción no es vinculante y no tiene ningún efecto legal. Si surge alguna duda relacionada con la exactitud de la información contenida en la ficha técnica traducida, consulte la versión en ingles.