ExxonMobil™
Exceed™ HD 4904 (Paxon™ SP5004)
High Density Polyethylene
Exceed™ HD 4904 is a blow molding grade high density polyethylene copolymer. It provides an exceptional balance of stress crack resistance, stiffness and impact strength. These properties afford significant opportunities for lightweighting in applications where over 1,000 hour bent strip ESCR is required.
- Supplier
-
Additive
Thermal Stabilizer: Yes
Applications
• Agricultural Products
• Containers
• Food Packaging
• Household and Industrial chemical containers
• Pharmaceutical PackagingForm(s)
Pellets
Revision Date
05/24/2023
Resin Properties
Typical Value (English) |
Typical Value (SI) |
Test Method |
|
|---|---|---|---|
| Density | 0.949 g/cm³ |
0.949 g/cm³ | ASTM D1505 |
| Melt Index (190°C/2.16 kg) | 0.38 g/10 min |
0.38 g/10 min | ASTM D1238 |
Thermal
| Vicat Softening Temperature | 250 °F |
121 °C | ASTM D1525 |
Molded Properties
| Tensile Strength at Yield | 3600 psi |
25 MPa | ASTM D638 |
| Flexural Modulus ‑1% Secant | 130000 psi |
890 MPa | ASTM D790 |
| Environmental Stress-Crack Resistance100% Igepal | 1200 hr |
1200 hr | ASTM D1693B |
| Durometer Hardness (Shore D, 15 sec) | 60 |
60 | ASTM D2240 |
Impact
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -4°F (-20°C) 73°F (23°C) |
2.0 3.3 ft·lb/in² ft·lb/in² |
4.1 6.9 kJ/m² kJ/m² |
Disclaimer
The information presented here was acquired by Quantum from the producer of the material. Quantum assumes no responsibility or liability for the accuracy of the information contained on this website. Please refer to the downloadable pdf data sheet provided directly by the producer.
Nota:
Esto es una traducción. Quantum no asume responsabilidad alguna por la exactitud de la traducción. Cualquier discrepancia o diferencia creada en la traducción no es vinculante y no tiene ningún efecto legal. Si surge alguna duda relacionada con la exactitud de la información contenida en la ficha técnica traducida, consulte la versión en ingles.