Supplier

Additive

Thermal Stabilizer: Yes

Applications

• Blow Molding
• Drainage Pipes
• Food Packaging
• Personal Care
• Sheet Extrusion

Form(s)

Pellets

Revision Date

04/14/2021

Resin Properties

Typical Value (English)
Typical Value (SI)
Test Method
Density
0.955  g/​​cm³
0.955  g/​​cm³
ASTM D1505
Melt Index (190°C/2.16 kg)
0.35 g/​10 min
0.35 g/​10 min
ASTM D1238
Peak Melting Temperature
266 °F
130 °C
ExxonMobil Method

Thermal

Vicat Softening Temperature
255 °F
124 °C
ASTM D1525

Molded Properties

Tensile Strength at Yield
4000 psi
27 MPa
ASTM D638
Flexural Modulus ‑1% Secant
(0.050 in/​min (1.3 mm/​min))
180000
 
psi
 
1200 MPa
ASTM D790
Environmental Stress-Crack Resistance100% Igepal

180

hr

180

hr
ASTM D1693B
Durometer Hardness (Shore D, 15 sec)
59
59
ASTM D2240

Impact

Charpy Notched Impact Strength-4°F (-20°C)
73°F (23°C

2.6
3.9

ft·lb/in²
ft·lb/in²

5.4
8.2

kJ/​m²
kJ/​m²
ISO 179/​1eA

Disclaimer

The information presented here was acquired by Quantum from the producer of the material. Quantum assumes no responsibility or liability for the accuracy of the information contained on this website.  Please refer to the downloadable pdf data sheet provided directly by the producer.

Nota:

Esto es una traducción. Quantum no asume responsabilidad alguna por la exactitud de la traducción. Cualquier discrepancia o diferencia creada en la traducción no es vinculante y no tiene ningún efecto legal. Si surge alguna duda relacionada con la exactitud de la información contenida en la ficha técnica traducida, consulte la versión en ingles.