ExxonMobil™
HD 4413 (HD 8512 Series)
High Density Polyethylene
ExxonMobil™ HD 4413 Series are high density hexene copolymers designed to offer superior toughness and stiffness. They are ideally suited for applications that require the optimum balance of low temperature toughness, creep resistance, stiffness, ESCR, and tear properties.
- Supplier
-
Additive
• HD 4413p.UV: Long Term; UV-20 Stabilizer: Yes
• HD 4413.UV: Long Term UV-20; Stabilizer: YesApplications
• Chemical Storage Tanks
• Industrial Products
• Intermediate Bulk Containers
• Septic Tanks
• Water TanksForms
HD 4413.UV: Pellets
HD 4413p.UV: Powder
Resin Properties
Typical Value (English) |
Typical Value (SI) |
Test Based On |
|
|---|---|---|---|
| Density | 0.944 g/cm³ |
0.944 g/cm³ | ASTM D1505 |
| Melt Index (190°C/2.16 kg) | 1.3 g/10 min |
1.3 g/10 min | ASTM D1238 |
| Peak Melting Temperature | 264 °F |
129 °C | ExxonMobil Method |
Thermal
| Deflection Temperature Under Load (DTUL) at 66psi — Unannealed | 142 °F |
61 °C | ASTM D648 |
| Deflection Temperature Under Load (DTUL) at 264psi — Unannealed | 102 °F |
39 °C | ASTM D648 |
Molded Properties
| Tensile Strength at Yield 2.0 in/min (50 mm/min) |
3200 psi |
22 MPa | ASTM D638 |
| Elongation at Yield (2.0 in/min (50 mm/min)) |
10 % |
10 % | ASTM D638 |
| Flexural Modulus — 1% Secant | 130000 psi |
870 MPa | ASTM D790B |
| Environmental Stress-Crack Resistance10% Igepal, F50 100% Igepal, F50 |
50 200 hr hr |
50 200 hr hr | ASTM D1693A |
Impact
| Impact Strength-40°F (-40°C), 0.125 in (3.18 mm) -40°F (-40°C), 0.250 in (6.35 mm) |
52 175 ft·lb ft·lb |
71 237 J J | ARM |
Disclaimer
The information presented here was acquired by Quantum from the producer of the material. Quantum assumes no responsibility or liability for the accuracy of the information contained on this website. Please refer to the downloadable pdf data sheet provided directly by the producer.
Nota:
Esto es una traducción. Quantum no asume responsabilidad alguna por la exactitud de la traducción. Cualquier discrepancia o diferencia creada en la traducción no es vinculante y no tiene ningún efecto legal. Si surge alguna duda relacionada con la exactitud de la información contenida en la ficha técnica traducida, consulte la versión en ingles.