ExxonMobil™
HD 4504 (Paxon™ AA45-004)
High Density Polyethylene
ExxonMobil™ HD 4504 is a blow molding high density polyethylene copolymer offering exceptional stress cracking resistance and impact performance.
- Supplier
-
Additive
Thermal Stabilizer: Yes
Applications
• Agriculture Products Containers
• Food Packaging
• Household and Industrial chemical containers
• Pharmaceutical PackagingForm(s)
Pellets
Revision Date
09/26/2022
Resin Properties
Typical Value (English) |
Typical Value (SI) |
Test Method |
|
|---|---|---|---|
| Density | 0.945 g/cm³ |
0.945 g/cm³ | ASTM D4883 |
| Melt Index (190°C/2.16 kg) | 0.35 g/10 min |
0.35 g/10 min | ASTM D1238 |
Thermal
| Brittleness Temperature | < ‑105 °F |
< ‑76 °C | ASTM D746 |
| Vicat Softening Temperature | 250 °F |
121 °C | ASTM D1525 |
Molded Properties
| Tensile Strength at Yield | 3500 psi |
24 MPa | ASTM D638 |
| Flexural Modulus ‑1% Secant (0.050 in/min (1.3 mm/min)) |
150000 psi |
1000 MPa | ASTM D790 |
| Environmental Stress-Crack Resistance100% Igepal | > 1000 hr |
> 1000 hr | ASTM D1693 |
Impact
| Tensile Impact Strength | 110 ft·lb/in² |
230 kJ/m² | ASTM D1822 |
Disclaimer
The information presented here was acquired by Quantum from the producer of the material. Quantum assumes no responsibility or liability for the accuracy of the information contained on this website. Please refer to the downloadable pdf data sheet provided directly by the producer.
Nota:
Esto es una traducción. Quantum no asume responsabilidad alguna por la exactitud de la traducción. Cualquier discrepancia o diferencia creada en la traducción no es vinculante y no tiene ningún efecto legal. Si surge alguna duda relacionada con la exactitud de la información contenida en la ficha técnica traducida, consulte la versión en ingles.