Supplier

Additive

UV Stabilizer

Applications

• Intermediate Bulk Containers

Revision Date

06/03/2020

Resin Properties

Typical Value (English)
Typical Value (SI)
Test Method
Density
0.946 g/​​cm³
0.946 g/​​cm³
ASTM D1505
Melt Index (190°C/2.16 kg)
< 0.10 g/​10 min
< 0.10 g/​10 min
ASTM D1238
High Load Melt Index (190°C/21.6 kg)
6.3 g/​10 min
6.3 g/​10 min
ASTM D1238

Thermal

Deflection Temperature Under Load (DTUL)
at 66psi — Unannealed
148 °F
65 °C
ExxonMobil Method

Molded Properties

Tensile Strength at Yield
3500 psi
24 MPa
ExxonMobil Method
Flexural Modulus — 1% Secant
 (0.050 in/​min (1.3 mm/​min))
 
120000
 
psi
 
820
 
MPa
 
ExxonMobil Method
Environmental Stress-Crack Resistance100% Igepal

> 1000

hr

> 1000

hr
ExxonMobil Method
Durometer Hardness (Shore D, 15 sec)
53
53
ExxonMobil Method

Impact

Charpy Notched Impact Strength
ExxonMobil Method
-4°F (-20°C), Type 1, Edgewise, Notch A
73°F (23°C), Type 1, Edgewise, Notch A
8.9
12
ft·lb/in²
ft·lb/in²
19
25
kJ/​m²
kJ/​m²

Disclaimer

The information presented here was acquired by Quantum from the producer of the material. Quantum assumes no responsibility or liability for the accuracy of the information contained on this website.  Please refer to the downloadable pdf data sheet provided directly by the producer.

Nota:

Esto es una traducción. Quantum no asume responsabilidad alguna por la exactitud de la traducción. Cualquier discrepancia o diferencia creada en la traducción no es vinculante y no tiene ningún efecto legal. Si surge alguna duda relacionada con la exactitud de la información contenida en la ficha técnica traducida, consulte la versión en ingles.