ExxonMobil™
HD 50330 (HD 6733.17)
High Density Polyethylene
ExxonMobil™ HD 50330 is a narrow molecular weight hexene copolymer designed to maximize injection molding speed and productivity in thin wall articles. Lower processing temperatures enable production of products free of taste and odor for food and beverage packaging.
- Supplier
-
Additive
Antioxidant: Yes
Applications
• Food Packaging Containers
• Food Service Trays
• Houseware Articles
• Housewares
• Toys
Resin Properties
Typical Value (English) |
Typical Value (SI) |
Test Based On |
|
|---|---|---|---|
| Density | 0.950 g/cm³ |
0.950 g/cm³ | ASTM D1505 |
| Melt Index (190°C/2.16 kg) 33 g | 33 g/10 min |
33 g/10 min | ASTM D1238 |
Thermal
| Deflection Temperature Under Load (DTUL) at 66psi — Unannealed | 161 °F |
71 °C | ASTM D648 |
| Deflection Temperature Under Load (DTUL) at 264psi — Unannealed | 110 °F |
43 °C | ASTM D648 |
| Peak Melting Temperature | 265 °C |
130 °F | ASTM D3418 |
Molded Properties
| Tensile Strength at Yield | 3400 psi |
24 MPa | ASTM D638 |
| Elongation at Yield | 20 % |
20 % | ExxonMobil Method |
| Flexural Modulus1% Secant 2% Secant |
170000 140000 psi psi |
1200 1000 MPa MPa | ASTM D790B |
| Environmental Stress-Crack Resistance10% Igepal, F50 | <1 hr |
<1 hr | ASTM D1693A |
Impact
| Impact StrengthNotched Izod Impact (-40°F (-40°C)) | 0.42 ft·lb/in |
23 J/m | ASTM D256 |
Disclaimer
The information presented here was acquired by Quantum from the producer of the material. Quantum assumes no responsibility or liability for the accuracy of the information contained on this website. Please refer to the downloadable pdf data sheet provided directly by the producer.
Nota:
Esto es una traducción. Quantum no asume responsabilidad alguna por la exactitud de la traducción. Cualquier discrepancia o diferencia creada en la traducción no es vinculante y no tiene ningún efecto legal. Si surge alguna duda relacionada con la exactitud de la información contenida en la ficha técnica traducida, consulte la versión en ingles.