ExxonMobil™
HD 5705 (HD 9856B) High Density Polyethylene

HD 5705 is a HDPE blow molding resin designed for high performance packaging applications. Containers made from HD 5705 exhibit a unique combination of stiffness and environmental stress cracking resistance. These properties, coupled with excellent processability on both continuous and intermittent equipment, afford significant lightweighting and/​or fast-cycling potential in many applications. HD 5705 does not contain any antistat.

Download PDF
Supplier

Additive

Thermal Stabilizer: Yes; Antistatic: No

Applications

• Caps and Closures
• Compression Moldings
• Food Packaging
• Household and Industrial chemical containers
• Pharmaceutical Packaging
• Thermoformed Parts
• Thin Gauge Sheet

Revision Date

03/01/2010

Resin Properties
Typical Value (English) 
Typical Value (SI)
Test Based On
Density
0.957 g/​cm³
0.957 g/​cm³
ASTM D1505
Melt Index (190°C/2.16 kg)
0.46 g/​10 min
0.46 g/​10 min
ASTM D1238

Thermal

Brittleness Temperature
< ‑105 °F
< ‑76 °C
ASTM D746

Molded Properties

Tensile Strength at Yield
4400 psi
30 MPa
ASTM D638
Elongation at Break
1100 %
1100 %
ASTM D638
Flexural Modulus
210000 psi
1400 MPa
ASTM D790A
Environmental Stress-Crack Resistance10% Igepal, F50

> 1000
hr

> 1000
hr
ASTM D1693

Impact

Tensile Impact Strength 
120
  ft·lb/in
260 J/​m
ASTM D1822

Disclaimer

The information presented here was acquired by Quantum from the producer of the material. Quantum assumes no responsibility or liability for the accuracy of the information contained on this website. Please refer to the downloadable pdf data sheet provided directly by the producer.

Nota:

Esto es una traducción. Quantum no asume responsabilidad alguna por la exactitud de la traducción. Cualquier discrepancia o diferencia creada en la traducción no es vinculante y no tiene ningún efecto legal. Si surge alguna duda relacionada con la exactitud de la información contenida en la ficha técnica traducida, consulte la versión en ingles.