ExxonMobil™
HD 6582 (HD 6908 Series)
High Density Polyethylene
ExxonMobil™ HD 6582 is a homopolymer with outstanding stiffness with a good balance of processability and cold temperature impact performance. This resin is ideally suited for articles requiring very high stiffness or enable down-gauging. This material offers excellent performance in structural foam articles.
- Supplier
-
Additive
HD 6582: Antioxidant: Yes; UV Stabilizer: No
HD 6582.UV: Antioxidant: Yes; UV Stabilizer: YesApplications
• Cases
• Crates
• Hot Fill Packaging Pails
• Materials Handling Articles
• Pallets
• Structural Foam Articles
• Totes BinsRevision Date
03/13/2015
Resin Properties
Typical Value (English) |
Typical Value (SI) |
Test Based On |
|
|---|---|---|---|
| Density | 0.965 g/cm³ |
0.965 g/cm³ | ASTM D1505 |
| Melt MasMelt Index (190°C/2.16 kg) | 8.2 g/10 min |
8.2 g/10 min | ASTM D1238 |
| Peak Melting Temperature | 275 °F |
135 °C | ExxonMobil Method |
Thermal
| Deflection Temperature Under Load (DTUL) at 66psi — Unannealed | 189 °F |
87 °C | ASTM D648 |
| Deflection Temperature Under Load (DTUL) at 264psi — Unannealed | 119 °F |
49 °C | ASTM D648 |
Molded Properties
| Tensile Strength at Yield | 4400 psi |
30 MPa | ASTM D638 |
| Elongation at Yield | 440 % |
440 % | ExxonMobil Method |
| Flexural Modulus | ASTM D790B | ||
| 1% Secant 2% Secant |
270000 230000 psi psi |
1900 1600 MPa MPa | |
| Environmental Stress-Crack Resistance10% Igepal, F50 | 3 hr |
3 hr | ASTM D1693A |
Impact
| Impact StrengthNotched Izod Impact (-40°F (-40°C)) | 0.89 ft·lb/in |
47 J/m | ASTM D256 |
Disclaimer
The information presented here was acquired by Quantum from the producer of the material. Quantum assumes no responsibility or liability for the accuracy of the information contained on this website. Please refer to the downloadable pdf data sheet provided directly by the producer.
Nota:
Esto es una traducción. Quantum no asume responsabilidad alguna por la exactitud de la traducción. Cualquier discrepancia o diferencia creada en la traducción no es vinculante y no tiene ningún efecto legal. Si surge alguna duda relacionada con la exactitud de la información contenida en la ficha técnica traducida, consulte la versión en ingles.