Qplast™
QPHJ 752 Series
High Density Polyethylene
Qplast™ QPHJ 752 is a narrow weight hexene copolymer resin designed for exceptional processability. It contains an optimal balance of ESCR, toughness, and stiffness. This resin is ideally suited for heavy-duty applications demanding reliable performance under conditions that include sub-zero temperatures.
- Supplier
-
Additive
QPHJ 752: Antioxidant: Yes
QPHJ 752.AS: Antistatic: YesApplications
- Industrial Components
- Industrial Pails
- Lawn & Garden Accessories
- Housewares
- Structural Foam Articles
Resin Properties
Typical Value (English) |
Typical Value (SI) |
Test Based On |
|
|---|---|---|---|
| Density | 0.951 g/cm³ |
0.951 g/cm³ | ASTM D1505 |
| Melt Index (190°C/2.16 kg) | 6.7 g/10 min |
6.7 g/10 min | ASTM D1238 (mod) |
| Peak Melting Temperature | 270 °F |
132 °C | ExxonMobil Method |
Thermal
| DTUL at 66psi — Unannealed | 163 °F |
73 °C | ASTM D648 |
| DTUL at 264psi — Unannealed | 115 °F |
46 °C | ASTM D648 |
Molded Properties
| Tensile Strength at Yield | 3600 psi |
25 MPa | ASTM D638 |
| Elongation at Yield | 1300 % |
1300 % | ExxonMobil Method |
| Flexural Modulus1% Secant 2% Secant |
190000 160000 psi psi |
1300 1100 MPa MPa | ASTM D790B |
| Environmental Stress-Crack Resistance10% Igepal, F50 | 4 hr |
4 hr | ASTM D1693B |
Impact
| Notched Izod Impact (-40°F (-40°C)) | 0.92 ft·lb/in |
49 J/m | ASTM D256 |
Disclaimer
The information presented here was acquired by Quantum from the producer of the material. Quantum assumes no responsibility or liability for the accuracy of the information contained on this website. Please refer to the downloadable pdf data sheet provided directly by the producer.
Nota:
Esto es una traducción. Quantum no asume responsabilidad alguna por la exactitud de la traducción. Cualquier discrepancia o diferencia creada en la traducción no es vinculante y no tiene ningún efecto legal. Si surge alguna duda relacionada con la exactitud de la información contenida en la ficha técnica traducida, consulte la versión en ingles.