Supplier

Additive

Antiblock: No; Slip: No; Processing Aid: No

Applications

  • Industrial Parts
  • Produce Crates
  • Buckets
  • Beverage Crates
  • Pails 

Resin Properties

Typical Value  (English)
Typical Value  (SI)
Test Method
Density
0.964 g/​cm³
0.964 g/​cm³
ASTM D792
Melt Index (190°C/2.16kg)
8.0 g/​10 min 
8.0 g/​10 min 
ASTM D1238

Molded Properties

Tensile Strength at Yield
4200 psi
29 MPa
ASTM D638
Tensile Strength at Break
4600 psi
32 MPa
ASTM D638
Tensile Elongation at Break
800 %
800 %
ASTM D638
Flexural Modulus — 2% Secant
150000 psi
1034 MPa
ASTM D790B
Environmental Stress-Cracking Resistance (ESCR)
122°F (50°C), 100% Igepal, F50 
2.5 hr
2.5 hr
ASTM D1693
Tensile Impact Strength
37  ft·lb/in²
77 kJ/​​m²
ASTM D1822

Thermal

Vicat Softening Temperature 
268 °F
131 °C
ISO 306/A

Disclaimer

The information presented in this document is believed to be accurate as of the date of publication. However, it is provided for general informational purposes only. It does not imply any express or implied warranty or quality specification, including but not limited to warranties of merchantability or fitness for a particular purpose. Users are solely responsible for independently assessing whether the product is suitable for their intended use and ensuring that it can be used safely and in compliance with relevant laws and regulations. We expressly disclaim liability for any loss, damage or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in this document.

Nota:

Esto es una traducción. Quantum no asume responsabilidad alguna por la exactitud de la traducción. Cualquier discrepancia o diferencia creada en la traducción no es vinculante y no tiene ningún efecto legal. Si surge alguna duda relacionada con la exactitud de la información contenida en la ficha técnica traducida, consulte la versión en ingles.

REV:2024